Aurora Energy home page

Electricity network

What do I look for?

Set up

Once your CablePI has been plugged in to a high-visibility, high traffic area all three lights will flash briefly and the device will beep once. This means it is going through a self-test. (This happens once every 24 hours.)

A solid green light will then come on and stay on, indicating that all is well.

The following table is a guide to how the CablePI works.

cablepi table

No lights

If there are no lights:

  • the power is off
  • the powerpoint is faulty – try moving it to another powerpoint
  • the device has failed – you can order a new CablePI online.

Flashing red light and alarm

Call Aurora immediately on 13 2004 (the number is written on the device).

Flashing amber light

This indicates a voltage problem. We advised that you get this checked by calling Aurora on 13 2004.

All lights flashing

This means that the CablePI has failed its daily self test and will need to be replaced. To order a new device call 13 2004 or order a new CablePI online.

back to top