What do I look for?
Set up
Once your CablePI has been plugged in to a high-visibility high traffic area all three lights will flash briefly and the device will beep once. This means it is going through a self-test. (This happens once every 24 hours.)
A solid green light will then come on and stay on indicating that all is well.
The following table is a guide to how the CablePI works
| Green | Amber | Red | Siren | Meaning | Action |
|---|---|---|---|---|---|
| Off | Off | Off | Off | Power off or CablePI failed | Check power supply is present. If not, call Aurora Energy on 13 2004 |
| Single flash | Single flash | Single flash | Single chirp | Self test | None |
| Flashing | Flashing | Flashing | Chirping | Failed self test | Call Aurora Energy on 13 2004 |
| On | Off | Off | Off | Normal operation | None |
| Off | Flashing | Off | Off | Low/High voltage | Call Aurora Energy on 13 2004 |
| Off | Off | Flashing | Constant | Potentially dangerous condition | Call Aurora Energy on 13 2004 |
No lights
If there are no lights:
- the power is off
- the powerpoint is faulty – try moving it to another powerpoint
- the device has failed – you can order a new CablePI online.
Flashing red light and alarm
Call Aurora immediately on 13 2004 (the number is written on the device).
Flashing amber light
This indicates a voltage problem. We advised that you get this checked by calling Aurora on 13 2004.
All lights flashing
This means that the CablePI has failed its daily self test and will need to be replaced. To order a new device call 13 2004 or order a new CablePI online.